E-cigarette liquids: Constancy of content across batches and accuracy of labeling.

AIMS: To assess whether bottles of refill liquids for e-cigarettes were filled true to label, whether their content was constant across two production batches, and whether they contained impurities. METHODS: In 2013, we purchased on the Internet 18 models from 11 brands of e-liquids. We purchased a second sample of the same models 4months later. We analyzed their content in nicotine, anabasine, propylene glycol, glycerol, ethylene glycol and diethylene glycol, and tested their pH. RESULTS: The median difference between the nicotine value on the labels and the nicotine content in the bottles was 0.3mg/mL (range -5.4 to +3.5mg/mL, i.e. -8% to +30%). For 82% of the samples, the actual nicotine content was within 10% of the value on the labels. All models contained glycerol (median 407mg/mL), and all but three models contained propylene glycol (median 650mg/mL). For all samples, levels of anabasine, ethylene glycol and diethylene glycol were below our limits of detection. The pH of all the e-liquids was alkaline (median pH=9.1; range 8.1 to 9.9). The measured content of two batches of the same model varied by a median of 0% across batches for propylene glycol, 1% for glycerol, 0% for pH, and 0.5% for nicotine (range -15% to +21%; 5th and 95th percentiles: -15% and +10%). CONCLUSIONS: The nicotine content of these e-liquids matched the labels on the bottles, and was relatively constant across production batches. The content of propylene glycol and glycerol was also stable across batches, as was the pH.

Targeted Screening and Quantification of dl-PCBs and Dioxins in Various Foodstuffs by Programmed-temperature Vaporizer Large-volume Injection Coupled to GC-MS.

In 2009, high concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) were found in soils located near the municipal garbage incinerator of Geneva. The matter of food contamination in this area was raised. Based on exposure criteria, a strategy of analysis of animal fats has been established with farmers in the Geneva area. Most methods of analysis of dl-PCBs, dioxins and furans, are based on gas chromatography coupled to high-resolution mass spectrometry (GC-HRMS) and considered as the reference methodology. An innovative approach was developed by programmed-temperature vaporizer large-volume injection (PTV-LV) and gas chromatography coupled with triple quadrupole mass spectrometry (GC-MS/MS) analysis. This analytical method was validated and was found suitable for screening and quantification of target compounds in animal fats (beef, pork, sheep, etc. ). PTV-LV coupled to GC-MS/MS appeared to be a good alternative compared to the GC-HRMS strategy, offering a good compromise between sensitivity, versatility of instrumentation, and economical aspects. A survey of 121 samples was conducted.

Hydrophilic interaction chromatography versus reversed phase liquid chromatography coupled to mass spectrometry: effect of electrospray ionization source geometry on sensitivity.

In this study, the influence of electrospray ionization (ESI) source design on the overall sensitivity achieved in hydrophilic interaction chromatography (HILIC) and reversed phase liquid chromatography (RPLC), was investigated. State-of-the-art triple quadrupole mass analyzers from AB Sciex, Agilent Technologies and Waters equipped with brand specific source geometries were tested with various mobile phase pH on 53 pharmaceutical compounds. The design of the ESI source showed to strongly influence the gain in sensitivity that can be achieved in HILIC compared to RPLC mode. The 6460 Triple Quadrupole LC/MS system from Agilent Technologies was particularly affected by mobile phase settings. Indeed, compared to RPLC conditions, 92% of the compounds had an increased signal-to-noise ratio at a flow rate of 300 µL/min in HILIC mode at pH 6, while this percentage dropped to only 7% at 1000 µL/min and pH 3. In contrast, the influence of flow rate and mobile phase pH on the gain in sensitivity between RPLC and HILIC was found very limited with the API 5000 LC/MS/MS system from AB Sciex, as only 15 to 36% of the tested compounds showed an enhanced sensitivity in HILIC mode. With the Xevo TQ-S instrument from Waters, superior sensitivity in HILIC was noticed for 85% of the compounds with optimal conditions (i.e., pH 3 and 1000 µL/min), whereas at sub-optimal conditions (i.e. pH 6 and 300 µL/min), it represented less than 50%. The gain in sensitivity observed in HILIC was found less significant with the recent LC-MS platforms used in this study than for old-generation instruments. Indeed, the improved ESI sources equipping the recent mass analyzers allow for enhanced evaporation efficiency, mainly for RPLC mobile phases containing high proportion of water and this even at high flow rates.

Targeted multidimensional gas chromatography using a heart-cutting device and cryogenic focusing for the determination of benzophenone derivatives in foodstuffs.

Photoinitiators are used to promote the polymerization process during the curing of varnishes or inks on cartonboard packaging. Depending on storage conditions and shelf life, these substances are able to migrate through the packaging layer into the foodstuff. This type of contamination phenomenon is therefore becoming a critical issue in terms of food safety. In order to tackle this problem, a fast and selective method was developed for the determination of benzophenone and three methylbenzophenone isomers in cereal-based foodstuffs and their cardboard packaging. Food samples or packages were efficiently extracted by pressurized liquid extraction using acetonitrile, and the extracts were directly injected onto the analytical system. The analysis was performed by multidimensional gas chromatography-mass spectrometry using a heart-cutting approach to reduce the background noise from complex matrices. The strategy employed two distinct cuts each containing its proper deuterated internal standard leading to accurate quantification. By integrating a cryofocusing effect, an enhancement in signal/noise ratio was achieved by a factor >10, which markedly decreased the sensitivity threshold. Moreover, baseline separation of the critical isomers allowed their unequivocal determination. The method was fully validated on cereal-based foodstuffs based upon an analysis of variance, and excellent performances were obtained at the decision limit making this method well suited for official food controls.

Application of monolithic supports to online extraction and LC-MS analysis of benzodiazepines in whole blood samples.

A column-switching (CS) LC-MS method allowing high-speed determination of benzodiazepines (BZDs) in whole blood is presented. After protein precipitation with ACN followed by evaporation and reconstitution with the loading mobile phase, the online sample clean-up was carried out using a CS device. Two extractive precolumns were evaluated: a conventional restricted access material (RAM) sorbent and a monolithic silica support. Separation was achieved using a Chromolith Performance RP-18e (100 mmx4.6 mm id) monolithic silica column, and detection was performed by atmospheric pressure chemical ionization (APCI) MS. The method with both supports has been fully validated according to an accuracy profile approach. Finally, the monolithic silica column, demonstrating better validation data and a higher robustness than the RAM sorbent, was used for the analysis of several real forensic cases.

A fast LC-APCI/MS method for analyzing benzodiazepines in whole blood using monolithic support.

A simple and fast procedure was developed for the simultaneous determination of eight benzodiazepines (BZDs) in whole blood using liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS). Sample pretreatment was carried out using a simple liquid-liquid extraction (LLE) with n-butylchloride, and chromatographic separation was performed using a monolithic silica column to speed up the analytical process. APCI and electrospray ionization (ESI) were compared. Whereas both ionization techniques appeared suitable for BZDs, APCI was found to be slightly more sensitive, especially for the determination of frequently low-dosed compounds. The method was validated according to the guidelines of the "Société Française des Sciences et Techniques Pharmaceutiques" (SFSTP) in the concentration range of 2.5-500 microg/L. The limit of quantification (LOQ) was 2.5 microg/L for all the compounds. Validation data including linearity, precision, and trueness were obtained, allowing subtherapeutic quantification of frequently low-dosed BZDs. The high selectivity of the mass spectrometer, along with the properties of the monolithic support, allowed unequivocal analysis of the eight compounds in less than 5 min. To demonstrate the potential of the method, it was used for the analysis of benzodiazepines in postmortem blood samples.

Rapid analysis of benzodiazepines in whole blood by high-performance liquid chromatography: use of a monolithic column.

In a previous work [J. Pharm. Biomed. Anal. 23 (2000) 447] a rapid high-performance liquid chromatography (HPLC) method, using a monolithic column in HPLC coupled with a diode-array detector, was developed for the quantitative determination of benzodiazepines in whole blood. The present method has been applied to the assay of eight benzodiazepines amongst the most frequently encountered in forensic toxicology: clonazepam, desalkylflurazepam, diazepam, flunitrazepam, lorazepam, midazolam, nordiazepam and oxazepam. The sample pre-treatment involved a liquid-liquid extraction of blood samples by n-butyl chloride. The separation was carried out in reversed-phase conditions using a Chromolith Performance (RP-18e 100 x 4.6 mm) column. The mobile phase was composed of a phosphate buffer (35 mM, pH 2.1) and acetonitrile (70:30, v/v) and the flow-rate was 2 ml/min. The duration of the analysis was less than 4 min and the results of validation, including linearity, precision, recovery, limit of quantification, were satisfactory. The therapeutic and toxic concentrations usually encountered for these substances could be measured. The compounds were separated by a monolithic column which, on account of its particular structure, could bear higher flow-rates than usually found for this kind of analysis. The present method has been applied to two real cases and was tested with about 30 compounds.